Created by Rose+Bopla to overcome the limitations of standard “off-the-shelf” housings, the flexible CombiCard® system provides the engineer with the capacity to adapt an enclosure to specific needs. Modular front, center and rear sections can be linked together in various combinations to produce a multitude of custom enclosure designs.
     The CombiCard® system is manufactured in ABS plastic, clear doors are polycarbonate. Modular sections are offered in three different external frame dimensions: 5¼” x 5½” (System 1000), 7¼” x 5½” (System 2000), and 11” x 5½” (System 3000).
     The depth of CombiCard® combinations is variable depending on the number of modular sections joined together. When assembling CombiCard® combinations, front, center, and rear sections are linked together by a set of four aluminum tie bars. These bars pass through molded-in channels in the corners of each modular section. Screws supplied with the front and rear sections attach into the ends of the bars drawing all sections together to make one complete enclosure. Tongue and groove channel, with a gasket between sections, provides dust/watertight sealing. Front and/or rear sections can also be hinged to allow easy access to internal components. Optional card frame accessories accommodate the installation of single height VMEbus boards, modular plug-in power supplies, etc. Back planes are offered in DIN 41612, DIN 41617 and press-in mother-board varieties.
     CombiCard® combinations can be panel mounted (DIN 43700), wall mounted or equipped with prop-up handle for table-top applications.

Note: These enclosures are not suitable for areas exposed to fuel, oil or petrol.
Please take the following into account when selecting system parts:
• All front, base and rear parts in a basic size can be combined with each other.
• The different enclosure parts can be hinged to each other.
• Front and rear parts can also be  mounted direct-without base part.
• Special tie bar sets are required to assemble the selected enclosure configuration.
• We recommend that CombiCard® 1000-3000 systems be assembled and processed in our factory.

Front Lids, Open and Closed Front Frames Page

Top of page

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA