you are here > Lines Carried > Rose-Bopla > Instrumentation Enclosures > CombiBac

Rose Bopla Enclosures - Instrumentation Enclosures - CombiBac

 

Instrumentation Enclosures - CombiBac
Download Product Drawings for the Group [PDF]
 

This flat ABS operating front was designed for use as a machine operating panel or control panel mounted enclosure. The wraparound seal provides IP 54 protection in respect of the installation area. The front surface was lowered especially for the protected fitting of membrane keyboards or other front elements. The installed electronic components can be protected by means of a sheet metal hood mounted on the back. The design and construction of these special hoods makes low-cost processing possible, also for small series.
     A special flush-mounted frame (CR) is available for flush mounted assembly. Good EMC screening is achieved by the later application of metal coating on the front lid. Select CombiBac bases can also be used with RCP / RCPM...F enclosures for control panel applications and EMC protection.

 

Technical Data
Color : Front Lid, light gray, similar to RAL 7035. Special colors available on request, minimum quantities apply.
Material: ABS front lid; base and flush-mounted frame, galvanized sheet steel, 0.8 mm. 
Ingress Protection: Front lid, up to IP 54, depending on the size and characteristics of the installation area.
Surface Resistance: ABS, >1014 Ohm to DIN 53482.
Flammability: Lid, UL 94 HB/1.6.
Disruptive Strength 17KV/mm to DIN 53481.
Note: Dimensions are external. Metric is the primary dimension. Inch conversions are for the user’s convenience and are for reference only.
 
Series 130 Front Lid, Bases, Frame
Series 160 Front Lid, Bases, Frame
Series 200 Front Lid, Bases, Frame
Series 250 Front Lid, Bases, Frame
Series 310 Front Lid, Bases, Frame
Series 400 Front Lid, Bases, Frame

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About UsFAQServicesTerms & ConditionsPolicies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542 
        
Order Line: 800-876-1152 (USA Only, Not Illinois)

Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 6018
9-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net