you are here > Lines Carried > Rose-Bopla > Instrumentation Enclosures > CombiCard 5000 - 7000 > System Components

Rose Bopla Enclosures - Instrumentation Enclosures - CombiCard 5000 - 7000 - System Components

 

Instrumentation Enclosures - CombiCard 5000 - 7000 - System Components
Download Product Drawings for the Group [PDF]
Gray and Clear Front Lids

Clear or light gray (similar to RAL 7035). Front Lid with integrated hinged quick release fastenings. There is a 1mm deep offset area for membrane keypads in the front area. 
Including: Front lid with seal; two mounted locks; one blind plug to close lock opening on the opening side; one catch to close lock opening and one-time definition of the hinge side on the front lid.
Model  Number Part Number Height (Inches/mm) Width (Inches/mm) Depth (Inches/mm) Weight
lbs.
FD 5000 79002800 5.79 / 147 6.93 / 176 1.34 / 34 .690
FD 6000 79002900 5.79 / 147 8.90 / 226 1.34 / 34 .728
FD 7000 79003000 5.79 / 147 12.72 / 323 1.34 / 34 1.039
FD 5000 G 79003100 5.79 / 147 6.93 / 176 1.34 / 34 .723
FD 6000 G 79003200 5.79 / 147 8.90 / 226 1.34 / 34 .847
FD 7000 G 79003300 5.79 / 147 12.72 / 323 1.34 / 34 1.100

G=Clear
 
Closed Front Frames
 

Closed front frame designed to hold membrane keypads. Mounting bosses are molded on the inside area for fitting PC boards, mounting plates or keyboard support plates. The front frame can be attached with snap-on covers on the base or rear, as well as with supplied screws needed to comply with VDE regulations. If required, upgrading to a hinged quick-release fastening is possible at a later date using accessory SV 5670. 
Including: Front frame with seal, two snap-on covers, four fixing screws.
 Model  Number Part Number Height
 (Inches/mm)		 Width
(Inches/mm)		 Depth
 (Inches/mm) 		Weight
lbs.
FR 5000 79003700 5.79 / 147 6.93 / 176 1.34 / 34 .743
FR 6000 79003800 5.79 / 147 8.90 / 226 1.34 / 34 .880
FR 7000 79003900 5.79 / 147 8.90 / 226 1.34 / 34 1.158
 
Open Front Frames
 

Open front frame design, for fitting front panels FP...Al with integrated pre-formed molded seal. Customer-specific panels with comparable quality and stability guarantee an IP 66 rating. The front frame can be attached by using the snap-on cover on the base or rear, as well as with supplied screws needed to comply with VDE regulations. If required, upgrading to a hinged quick-release 
fastening is possible at a later date using accessory SV 5670.
Including: Front frame with seal, two snap-on covers, four fixing screws, 10 front panel mounting screws.
 Model  Number Part Number Height
 (Inches/mm)		 Width
(Inches/mm)		 Depth
 (Inches/mm) 		Weight
lbs.
FO 5000 79003400 5.79 / 147 6.93 / 176 1.34 / 34 .633
FO 6000 79003500 5.79 / 147 8.90 / 226 1.34 / 34 .710
FO 7000 79003600 4.79 / 147 12.73 / 323 1.34 / 34 .867
Top of page

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net