you are here > Lines Carried > Rose-Bopla > Build-A-Box > BOS - Ecoline

Rose Bopla Enclosures - Build-A-Box - BOS - Ecoline

 

Build-A-Box - BOS - Ecoline

The BOS-Ecoline enclosure system combines the custom sizing advantages of aluminium profiles with the cost effectiveness of ABS plastic end lids to create a robust enclosure that can be used for a wide range of electronic applications. These clear anodized aluminium profiles are available in three different versions - closed, open on one side, or split profiles - in four profile width sizes from 57.5 mm to 120 mm. Profiles are equipped with integral guide grooves for PC Boards. Two ABS plastic end lids are available, with or without wall brackets. Profiles feature recessed areas for front membranes or membrane keypads. IP 40 rating is standard, but can be increased to IP 54 on ELP profiles with seals in the end caps. Seal kits and end lids are sold separately. Profiles are sold in meter lengths.
 
BOS-Ecoline Profiles
 
ELP - Closed Profile
ELPH - Horizontally Split Profile
ELPU - Open on one side
 
Technical Data
Color: Profiles, clear anodized aluminum
End lids, dust gray, similar to RAL 7037.
Special colors and minimum order quantities on request
Material: Profile, Aluminum, Al Mg Si 0.5.
See Aluminum specifications in the Technical Information Chapter.
End lids, ABS plastic
Protection Classifications: IP 40, DIN EN 60529
IP54, when using seal (EL-DI) with 620, 840, 1050 and 1240
ELP type extrusions only.
 
Part Number Length
Inches/mm		 Width
Inches/mm		 Height
Inches/mm
 ELP 620-1000 39.37 / 1000 2.26 / 57.5 0.86 / 22
ELP 840-1000 39.37 / 1000 3.14 / .80 1.65 / 42
ELP 1050-1000 39.37 / 1000 4.14 / 106 2.05 / 52
ELP 1240-1000 39.37 / 1000 4.72 / 120 1.65 / 42
ELPH 620-1000 39.37 / 1000 2.26 / 57.5 0.86 / 22
ELPH 840-1000 39.37 / 1000 3.14 / .80 1.65 / 42
ELPH 1050-1000 39.37 / 1000 4.14 / 106 2.05/  52
ELPH 1240-1000 39.37 / 1000 4.72 / 120 1.65 / 42
ELPU 620-1000 39.37 / 1000 2.26 / 57.5 0.86 / 22
ELPU 840-1000 39.37 / 1000 3.14 / .80 1.65  42
ELPU 1050-1000 39.37 / 1000 4.14 / 106 2.05 / 52
ELPU 1240-1000 39.37 / 1000 4.72 / 120 1.65 / 42

ELP = Closed profile, ELPH = Horizontally split profile, ELPU = Extrusion open on one side.  Note: Dimensions are external. Metric is the primary dimension.
Inch conversions are for the user’s convenience and are for reference only.  All extrusions sold in 1 meter lengths.
Download Product Drawingsfor this Group [PDF]

 

We have attempted to present the information about our vendor's products on this website in a straight-forward manner. We offer this information as accurate at the time of publication. Specifications are subject to change without notice. Electro-Stock, Inc. is not responsible for inadvertent errors.

About Us • FAQ • Services • Terms & Conditions • Policies

Since 1983   

Hours: Monday through Friday 8:30am through 4:00pm CST - Leave Messages On Voice Mail After Hours.
Phone: 630-682-1542          
Order Line: 800-876-1152 (USA Only, Not Illinois)
Email: sales@electrostock.com         Mail & Remit To: 1218 E. Wilson Ave. Wheaton, IL 60189-6748 USA

 Home | Contact | © 1996 - 2012 Electro-Stock, Inc | Original Design by www.mitchinson.net